An open µ-Slide (chambered coverslip) with 8 wells for use in...
2 well silicone insert with a defined cell-free gap, suitable for wound...
A 35 mm imaging dish with an ibidi Polymer Coverslip Bottom, used in...
Channel slides with different heights, volumes, and coatings specially...
MV 20: The ibidi Pump System
MV 21: Long-Term Cell Culture Under Perfusion
MV 17: HUVEC Culture Under Flow
MV 10: HUVEC Culture Under Perfusion vs. Static Conditions
AN 03: Growing Cells in µ-Channels (PDF) Growing cells inside a µ-Slide VI 0.4, and a comparison between channels and open wells
AN 11: Shear Stress and Shear Rates (PDF) Detailed information on shear stress/shear rates and flow rates in our channel slides
AN 18: Shear Stress and Shear Rates in µ-Slide µ-Shaped (PDF) Detailed information on shear stress/shear rates and flow rates in our µ-Slide y-shaped
AN 48: Shear Stress and Shear Rates in ECIS Flow Arrays (PDF) Detailed information on shear stress, shear rate, and flow rate calculations in ECIS Flow Arrays
AN 13: HUVECs Under Perfusion (PDF) Setting up a flow experiment using μ-Slide I and HUVECs
AN 25: Serial Connection of Flow Chambers (PDF) Setup protocol for connecting several Luer-Slides to one Fluidic Unit
AN 31: Serial Connection of µ-Slide VI 0.4 (PDF)Protocol for connecting the six channels of µ-Slide VI 0.4 to one Fluidic Unit
Copyright © 2017 ibidi GmbH. All rights reserved. Certified ISO 9001, ISO 13485