• ibidi Heating System, Multi-Well Plates
  • ibidi Heating System, Multi-Well Plates

ibidi Heating System, Multi-Well Plates

Heating system for the Nikon TI-S-E and TI-S-ER Motorized Stage which holds multi-well plates (for low magnification only)

  • Permits the user to control the temperature of samples held in multi-well plates
  • Excellent illumination of the sample - no condensation due to heated top plate, and suitable for DIC
  • Ideal for live cell imaging applications - full incubator conditions on the microscope

ibidi Temperature Controller

+

Heated Plate with Heated Glass Bottom

+

Heated Glass Lid,
Multi-Well Plates

+

Multi-well Plate


For pricing and online ordering, please log in.

Cat. No. Description Pcs./Box
10926 ibidi Heating System, Multi-Well Plates on a Nikon TI-S-E or TI-S-ER Motorized Stage: ibidi Temperature Controller, Heated Plate for Multi-Well Format, Heated Lid, for Nikon TI-S-E and TI-S-ER Motorized Stage 1

Applications:



 

Specifications:

Temperature Controller
Environmental humidity Relative humidity 0% - 99%
Environmental temperature +5°C - +40°C
(50% rel. humidity)
Dimensions
(H x W x D in mm)
90 x 170 x 230
Weight 3.4 kg
Input voltage 230 V / 50 Hz // 115 V / 60 Hz

Note:
This heating system only fits the Nikon TI-S-E and TI-S-ER Motorized Stages. For versions to fit other microscopy stages, please contact ibidi directly.

 

 

Heated Plate and Heated Lid
Dimensions Plate / Lid (in mm) 236 x 155 x 8 / 167 x 109 x 25
Height of the system 30 mm (22 mm from microscope stage)
Weight of incubation chamber 610 g
Gas inlet Luer connector (M5 thread) with Luer Lock
Restrictions for objective lenses
Working distance < 1 mm
Custom openings On request

ibidi Temperature Controller

  • Provides excellent temperature stability within the incubation chamber
  • Four control channels allow to connect a heated plate, a heated lid, and two additional heated components (e.g., an objective heater)

Technical Features:

  • Temperature stability: ± 0.05 °C
  • Temperature uniformity across the insert: ± 0.5 °C
  • Temperature range: Room temperature - 45 °C
  • Control channels: 4
  • TempControl software for remote control and data recording included
  • External temperature sensor included
  • Adjustable alarm function included
  • Analog output for extreme noise reduction optional

Heated Plate with Heated Glass Bottom, Multi-Well Plates

  • To be used with the Nikon TI-S-E and TI-S-ER Motorized Stage which holds multi-well plates
  • For low magnification only (working distance > 1mm)
  • Suitable for DIC
  • For use with multi-well plates

Heated Glass Lid, Multi-Well Plates

  • For use with CO2, O2, and humidity to provide a complete environmental chamber
  • Independently controlled glass lid prevents the formation of condensed water on the lid of the microscopy chamber or plate
  • No scattering of light or shadow formation

µ-Dish Microscopy Rack

  • A microscopy rack for perfect µ-Dish stabilization
  • Adaptable with the ibidi Heating System, Multi-Well Plates
  • Compatible with all inverted microscopes
  • Lids fixed with magnetic positioning for additional stabilization

µ-Slide Microscopy Rack

  • A microscopy rack for perfect µ-Slide stabilization
  • Adaptable with the ibidi Heating System, Multi-Well Plates
  • Compatible with all inverted microscopes
  • Lids fixed with magnetic positioning for additional stabilization

Gas Mixer for the Incubation Unit

The heated lid also comes with a gas inlet. The ibidi Gas Incubation System upgrades the ibidi Heating System to a complete stage top incubator for all live cell imaging applications, including high resolution, TIRF, and confocal microscopy.

The ibidi Gas Incubation System is suitable for various experimental conditions (e.g., pH, hypoxia, hyperoxia). It is available in two versions: Gas Mixer for CO2, Gas Mixer for CO2 and O2.


Overview of the Heating and Incubation System for Multi-Well Plates


Live Cell Imaging under Flow Conditions

The ibidi Heating & Incubation System can be adapted for live cell imaging under flow conditions using the Heating Insert Adapter for perfusion assays. Connect the ibidi Pump System to an adapted heated plate and heated lid to receive the perfect environment for long-term cell studies under flow conditions.


Click to enlarge

Special Solutions

You can also obtain additional customer-specific solutions upon request.

 


E-mail:
Password:
Forgot your password?
You do not have an account? Register now.

Your shopping cart is empty.

Please note: You need to be logged in to use the shopping cart.